Qi2.2
Q28-A
P28-A / S28 / S28-T
Foldable flat · Metallic finish
25W · 5 colours
Products — 01
3-in-1 Wireless Charging Stations
Phone, watch and earbuds on one base. Eighteen tooled models, six of them available in three builds off the same mould — Qi2.2 25W, standard Qi, or a cost-optimised version for price-led markets.
- Models in line
- 18
- Phone output
- 15W – 25W
- Watch / earbuds
- 2.5W / 3–5W
- Minimum order
- 500 pcs
One mould, three builds
The same housing, three different price points.
Six models in this line exist as a Q, P and S version. The housing, the jig and the packaging are identical. What changes is the coil assembly, the wireless charging chipset and the certification package.
Q series
Qi2.2 certified, 25W magnetic. WPC registration QHD 10136. For accounts selling into Apple-heavy markets.
P series
Standard Qi, 15W. Same housing, lower BOM. For markets where Qi2 phones are still a minority.
S series
Cost-optimised 15W. Same tooling, simplified light module. For private label and promotional programmes.
Why it matters: you can test one model with a Qi2 build, then scale the same SKU into a cheaper tier without opening a second mould, re-running a full compliance cycle, or explaining to your buyer why the product looks different. One artwork file, one carton spec, one drop-test result.
Selected models
Three shapes that cover most programmes.
These three are the fastest movers in the line. Every other model is in the table below with its full electrical and mechanical specification.
Qi2.2
Q66-A
P66-A / S66
Curved stand · Air-cooled
25W · 3 colours
Qi
X499
Flat pad · RGB light
15W · 5 colours
Full line
All 18 models, side by side.
Electrical and mechanical data as published in our 2026 catalogue. Anything not listed here — coil supplier, chipset, cable gauge, packaging dimensions — we send on request.
| Model | Build variants | Form | Phone | Watch | Earbuds | Size (mm) | Material |
|---|---|---|---|---|---|---|---|
| Q66-A | P66-A / S66 | Curved stand | 25W | 2.5W | 5W | 109.1 × 83.5 × 101.8 mm | Raw plastic + electroplating |
| Q36-A | P36-A / S36 | Round-base stand | 25W | 2.5W | 5W | 94.9 × 109.9 × 141.5 mm | Raw plastic + spray painting |
| Q29-A | P29-A / S29 | Foldable flat | 25W | 2.5W | 5W | 106.85 × 65.54 × 26.6 mm | Raw plastic + spray painting |
| Q28-A | P28-A / S28 / S28-T | Foldable flat | 25W | 2.5W | 5W | 106.85 × 65.54 × 26.6 mm | Raw plastic + spray painting |
| Q26-D | P26-D / S26 | Pole stand | 25W | 2.5W | 5W | 106.46 × 97.91 × 138.65 mm | Raw plastic + spray painting |
| Q11-A | P11-A / Q11 / S11 | Pole stand | 25W | 2.5W | 5W | 106.85 × 65.54 × 26.6 mm | Raw plastic + spray painting |
| S1-B | — | Foldable flat | 15W | 2.5W | 3W | 65.7 × 115.6 × 29.5 mm | Substrate + spray coating |
| S1-A | P1-A | Foldable flat | 15W | 2.5W | 3W | 65.7 × 115.6 × 29.5 mm | Substrate + electroplating |
| S6 | P6-A | Cube | 15W | 2.5W | 3W | 68 × 68 × 66.8 mm | ABS + PC |
| S8 | — | Cube | 15W | 2.5W | 3W | 80 × 80 × 85 mm | ABS + PC |
| S9 | — | Cube | 15W | 2.5W | 3W | 68 × 68 × 75 mm | ABS + PC |
| X549 | — | Rotary base | 15W | 2.5W | 3W | 80 × 80 × 85 mm | ABS + PC |
| X548 | — | Foldable, adjustable angle | 15W | 2.5W | 3W | 133 × 110 × 62 mm | ABS + PC |
| X559 | — | Stand + power bank | 15W | 2.5W | 5W | Base 80 × 95 × 108 mm · Bank 69 × 15 × 99 mm | ABS + PC |
| S3 | — | Stand + power bank | 15W | 2.5W | 5W | Base 80 × 95 × 108 mm · Bank 69 × 18.6 × 107.9 mm | ABS + PC |
| X546 | — | Three-disc fold | 15W | 2.5W | 3W | 84.5 × 72 × 26 mm | ABS + PC |
| X499 | — | Flat pad | 15W | 2.5W | 3W | 150.6 × 150.6 × 30.8 mm | ABS + PC |
| X455 | — | Ultra-slim pad | 15W | 2.5W | 3W | 165 × 141.3 × 13 mm | ABS + acrylic |
Qi2.2 25W applies to Q-series models. P and S builds ship at 15W standard Qi. All models charge iPhone, Apple Watch and AirPods; Android phones charge at 5W–15W depending on coil alignment.
Buyer questions
What importers ask before ordering.
What is the difference between the Q, P and S versions?
They are the same physical product with a different wireless charging module. Q runs Qi2.2 at 25W and carries WPC registration QHD 10136. P runs standard Qi at 15W on the same housing. S is a cost-reduced 15W build with a simplified light module. Tooling, enclosure dimensions, packaging and carton spec are identical across all three, so you can mix tiers in one container.
What is the minimum order quantity?
500 pcs per model and per colour for catalogue builds. Below that we can still quote, but expect a surcharge of roughly 15–20% because the SMT line changeover cost is amortised over fewer units. Private mould development starts at 3,000 pcs.
Can I put my logo on it and use my own packaging?
Yes. Logo can be laser-etched, silk-screened or pad-printed depending on the housing finish. Retail box, sleeve, manual and insert are all customisable, and we hold your artwork and dieline on file for reorders. Standard lead time with custom packaging is 25–30 days.
Do the stations work with Android phones?
The watch and earbud pads are Apple-oriented by default, because that is what most of our accounts sell against. The phone pad is a standard Qi surface: any Qi-enabled Android phone will charge, at 5W to 15W depending on alignment and coil size. If your market is Android-heavy we can swap the watch pad for a second phone pad or a TWS pad at the quotation stage.
What certifications come with the product?
Qi (WPC), FCC Part 15, CE-EMC and RoHS 3 as standard, all issued per model. For markets that need more — UKCA, MIC, SIRIM, ANATEL — we run the additional tests and the report is issued in your company name, not ours. Battery-containing models such as X559 and S3 also carry UN38.3 transport reports.
How do you handle quality problems after shipment?
AQL 2.5 inspection before the carton is sealed, with a photo report sent to you. If a defect rate above 2% shows up in your incoming inspection, we replace the affected units in the next production run at our cost, provided the failure is a manufacturing defect and not field damage. Warranty is 12 months from the shipment date.
Request a quote
Tell us the model, the quantity and the market.
A product engineer reads this, not a chatbot. Most quotes go out within one business day, with a real unit price and a real lead time.
- A model number or a reference photo — either is fine
- Quantity band and destination market
- Customisation: logo, colour, packaging, plug standard
- Compliance requirement for your country
Request received.
A product engineer will come back to you within one business day with a unit price, a lead time and the certification documents for the model you asked about.